Milwaukee 6955-20 Review – Don’t Buy the Milwaukee 6955-20 Before Reading This
Milwaukee 6955-20 Review by Jack Henderson
| Overall Rating |
|
Looking for a great deal on the Milwaukee 6955-20? Click Here to check it out on Amazon.
One of the most precise compound miter saws available today is the Milwaukee 6955-20. With its exclusive Digital Miter Angle Fine Adjust with Detent Override, you can easily choose which angle you’d like to cut so that you’re not stuck working in a square environment. The great thing about this fine adjust is that it allows for one hand operation, which means that you can have one hand on the material while the other hand is making the adjustments. This has a self zeroing system that works on the entire miter angle range, which means any angle you want to cut, you can.
There are dual integral jobsite lights that illuminate the material you’re working with and the cut line from both sides of the blade, so that you can actually see the blade entering the workpiece.
The Milwaukee 6955-20 has a unique soft start feature that means the blade can “sneak up” on the cut line so that the material is not suddenly damaged. To get to full speed, however, the blade only needs about two seconds, so you know that the power will soon come. The motor on this saw has constant power technology that allows constant speed under load. With an RPM of 3,250 that stays constant whether there’s no load or during loaded cutting, you can be sure that the cut will be quick and clean no matter what the material is.
For an extremely wide range of cuts, there are 9 positive bevel stops, which means the saw can bevel 0-48 degrees left and right.
Perfect for:
1) Hardwood Materials
2) Precision work
3) Cutting lumber
4) Pre-finished millwork
5) Framing
6) Fine trim work
Great features:
- 15 amp, 3.3 horsepower direct drive motor
- Digital Miter Angle Fine Adjust
- Detent override
- Dual integral jobsite lights
- Electronic soft start
- Integral dust channel
- Oversized single lever bevel adjustment
- 9 positive bevel stops
- 0-48 degree left and right bevel
Pros:
- Very good dust collection
- Able to choose any miter angle you’d like
- Job lights make it incredibly easy to see what you’re doing
- Almost no deflection
Cons:
- No clamp for workpiece
As one of the only saws that can boast about its Digital Miter Angle Fine Adjust, the Milwaukee 6955-20 stands out as a saw that excels in the category that matters, which is precision of cuts. Its single handed operation, self zeroing system, and integral jobsite lights make for an extremely easy experience, which means that anyone can work with the Milwaukee 6955-20, no matter their level of expertise.
Combine these features with the insane amount of power, integral dust channel, soft start, and unique bevel stops, and you’ve got yourself an amazing saw that will work with almost any material and any cut you need, which is exactly what the Milwaukee 6955-20 is.
Since he is a frequent user of power tools, Paul Harrelson understands what is necessary in order to make a compound miter saw great, and he believes that the Milwaukee 6955-20 has fulfilled these requirements. Here is his review:
“I have been using a Hitachi C10FS for many years now and have been very pleased with its performance. I have no complaint with my Hitachi but have had on occasion the need for a 12″ capacity. I had previously looked at the Hitachi 12″ slide miter at Lowes, but was unimpressed with the gadgets and the saw seemed to flex and wander. The quality was also lacking in the Dewalt, and I had pretty much decided on the Makita LS1214, and was prepared to purchase one when Milwaukee came out with their 6955-20. Home Depot had them in stock so I was able to evaluate the fit, finish, stability and check out the flex, wander and general quality of the saw. I was very impressed. Although the saw was manufactured in Taiwan and not in the US, the quality seemed every bit the standards I have come to expect from Milwaukee on their previous domestically produced tools.
Strengths:
Very sturdy and accurate.
Makes 60 deg right cuts and 55 deg left cut capacity.
Digital fine adjustments for miter cuts.
Adequate dual lights on ether side of blade.
Constant Power Technology (resulting in smoother cuts).
Easy to read positive miter stops.
50 deg bevel left and right.
Large fence.
Depth paw stop for switching back and forth from full to partial depths.
Direct drive
No unnecessary gadgets.
This saw is top notch! Smooth, very powerful, accurate and very well-built. I mounted this saw on a Ridgid miter stand and can setup and take down in seconds. Everything was well adjusted from the factory, only a minor adjustment of one of the bevel angle indicators needed to be corrected. The digital readout has proven useful, especially on those not so square, stain grade joints that must be perfect. The motors Constant Power Technology has a different feel when cutting, but performs flawlessly. I am glad they decided to forgo the laser gimmick in lieu of the dual lights which proved to be more valuable than I had anticipated. The depth paw stop has proved very handy a couple of times already, when having to switch back and forth from full to partial depths on a job.
I have some Milwaukee tools that are over 30 years old, only having to replace rotting electrical cords or brushes. I would not be surprised to find this tool falling into the same category… ”
Click Here to read more Milwaukee 6955-20 Reviews
Recent Comments